Adie 3/8" Stabiliser Extender Bolts
Fitted bundle deal
includes Accessories + Fitting
Sorry - this product is unavailable right now
- Help & Advice
- Buying Options
ADIE 3/8" STABILISER EXTENDER BOLTSThese Adie 3/8" Stabiliser Extender Bolts will let you fit stabilisers to a bike with 3/8" axles, and will get your mini cyslist zooming around in no time at all. They grow up so fast!
ADIE 3/8" STABILISER EXTENDER BOLTS EXTRA INFO
- Suitable for cycles with 3/8" axles
Gender: Unisex Size: 3/8" Type: Stabilisers
Adie 3/8" Stabiliser Extender Bolts is rated out of 5 by 5.Rated 5 out of 5 by iMogster from Just what I needed I was about to put stabilisers on my son's new bike for Christmas. It was 23rd Dec in the evening. The axles were not long enough and I was panicing! I looked on Halford's site and saw these, used the 1 hour pick up and then went and got them. They extended axles perfectly and I was able to put stabilisers on. We went on bike ride Christmas day as planned! Brilliant product.Date published: 2017-01-06Rated 5 out of 5 by DaddyC0OL from Simple solution to a tricky problem! Daughter's bike was delivered with no stabilisers fitted, despite being advertised with them (not Halfords, I hasten to add!). Pretty quickly it became obvious that there wasn't room on the thread of the rear axle to fit the bolts that the stabilisers needed to be secure. Faced with a) returning the bike to the online shop and disappointing a 4 year-old, b) replacing the entire rear axle, with all the fiddly bearings, etc, or c), trying these out. Went for c, obviously! These were fitted easily and worked a treat. Remove old bolts, replace with these, add stabilisers, put old bolts back on the end. Job done, minimum fuss. Check you're buying the right size though, as axles (and consequently these bolts) come in two thicknesses. Make sure they're tight enough, but not so tight they strip the thread. Short version = Recommended.Date published: 2015-09-29Rated 5 out of 5 by PaulMcM83 from Eaxctly what I needed Perfect for allowing me to put stabilisers on my son's 20" wheels. Though with these extenders it leaves it so the support bars do not sit right on the back wheel bars so I jus put the stabilisers on without these bars.Date published: 2015-01-13Rated 4 out of 5 by Anonymous from Does the job! Product does exactly what it is suppose to and worked well with bike. Easy to fit and got at good price so all good.Date published: 2013-07-08Rated 4 out of 5 by hinterglem from Make sure you get the right size! These extenders did the job very well, enabling me to fit stabilisers on my daughter's bike. There are 2 things to be aware of though: 1) no washers are supplied - in my case, washers were essential so I had to go out and by some separately. 2) there are 2 different sizes, but the packets look the same, and you can't tell by looking at the product so make sure you check the label and get the right one (a 3/8 wheel nut will not fit on a 10mm extender).Date published: 2011-06-02
You can purchase products supplied by Halfords and selected other suppliers on halfords.com.
Checkout is always via halfords.com and all payment will be taken via halfords.com. In checkout the products will be split into separate deliveries for each supplier.Showing 1 - X of our buying options
Price Seller Info Purchase