Skip to main content
Saved
€0.00
AGE RESTRICTED: 18+
  • Simply Window Light Smoke Film 76 x 300cm
  • Simply Window Light Smoke Film 76 x 300cm
  • Simply Window Light Smoke Film 76 x 300cm

Simply Window Light Smoke Film 76 x 300cm

Simply Window Light Smoke Film 76 x 300cm

The Simply Window Light Smoke Film 76 x 300cm reduces heat and glare from the sun and blocks out UV rays. The film can be easily fitted and acts as a stylish security tint.

Features and Benefits:

  • Full instructions provided, for self-application

  • Dual purpose, can be used in at home or in your car

  • Dimensions: 76x300cm

  • All Simply Window Films provide your car windows with a high-quality and stylish look. They also provide protection from sun, heat, and glare and can serve as security film

  • Covers rear windscreen and rear windows on most vehicles

Additional Info

Please be advised that this item may only be collected in store by someone over the age of 18.

Self application - No fitting service available

The Law - "Under regulations first issued 20 years ago and clarified three years ago, the windscreen must allow in at least 75 per cent of light while at least 70 per cent must pass through the driver's side windows"

The Highway Code states - "You MUST NOT use a vehicle with excessively dark tinting applied to the windsceen, or to the glass in any front window to either side of the driver. Window tinting applied during manufacture complies with the Visual Light Transmittance (VLT) standards. There are no VLT limits for rear windscreen or rear passenger windows"

Specifications

Material

Window tint film (self-adhesive)

Type

Graphics and Tint

Dimensions

76 x 300cm

Contents

1 x Window Tint Film, 1 x Knife, 1 x Scraper blade

Finish

Light Smoke (35% VLT)

Adhesive type

Self-Adhesive (Removable Adhesive)

Visible Light Transmission

35% VLT

Self application instruction

Full instructions provided for self-application. Side Window: 1. Prepare window with soapy water solution (1tsp washing up liquid per pint cold water). Clean inside and outside, roll window down 5cm and clean rubber ridge. 2. Identify clear liner using tape method. Lay film on outside with liner facing you, cut to shape leaving 5cm excess at bottom. 3. Peel liner, spray adhesive side and inside of window, apply from inside with window rolled down 1cm. Squeegee from centre outwards. Slip bottom edge under window gasket. Allow up to 15 days to fully cure. Rear Window (curved): Cut film into horizontal strips with 1-2mm overlap as needed.

SKU

447832