Paint Protection Film Black, 15cm x 1.2m

Paint Protection Film Black, 15cm x 1.2m

The Halfords Paint Protection Film Black (15cm x 1.2m) is a heavyweight high strength film coating. Provides an additional protective layer for areas of bodywork prone to damage.

• Satin Black Paint Protection Vinyl Film

• High strength adhesive

• Quick to apply - easy roll release

• Can be applied wet or dry

• Replicates OEM finish

Perfect for additional protection to bodywork areas prone to chips scratches e.g door sills, boot sills, bumper edges, lower arches etc.

Direction for Use:

• 1. For recently repainted vehicles ensure paint is fully cured before applying film.

• 2. Ensure application area and surrounding area is clean and dry.

• 3. With the backing still in place, dry fit the film to check the placement and carefully cut to the size required.

• 4. Tight edges and complex panel shapes may require relief cuts in the film to enable it to bond smoothly.

• 5. Where water does not pose a risk of damage, add 1 or 2 drops of washing up liquid to 500ml of water in a spray bottle.

• 6. Liberally spray the application panel, peel the backing paper from the film spraying it as you peel.

• 7. Place the wet film onto the wet panel gently and align it to the desired position (apply dry if water is not suitable for the area being applied to).

• 8. Once positioned, press down firmly with a small squeegee or piece of card, working the water out from the centre to the edges.

If any air bubbles remain, these can be carefully pierced with a pin to squeeze out any remaining air.