Halfords Bodyshop Primer Black 500ml
258683
Shop now. Pay later. Always interest-free.
-
Add your favourites to basket
-
Select Clearpay at checkout
-
Log into or create your Clearpay account, instant approval decision
-
Your purchase will be split into 4 payments, payable every 2 weeks
Clearpay lends you a fixed amount of credit so you can pay for your purchase over 4 instalments, due every 2 weeks. Ensure you can make repayments on time. You must be 18+ and a permanent UK resident (excl Channel Islands). Clearpay charges a £6 late fee for each late instalment and a further £6 if it's still unpaid 7 days later. Late fees are capped at £6 for orders under £24 and the lower of £24 or 25% of the order value for orders over £24. Missed payments may affect your ability to use Clearpay in the future and your details may be passed onto a debt collection agency working on Clearpay's behalf. Clearpay is credit that is not regulated by the Financial Conduct Authority. T&Cs and other eligibility criteria apply at clearpay.co.uk/terms
Halfords Bodyshop Primer Black 500ml
258683
- Bodyshop primer
- Colour: Black
- Size: 500ml
Halfords Bodyshop Primer Black 500ml
The Halfords Bodyshop Primer Black (500ml)is a bodyshop-quality automotive primer, designed to give you a professional finish every time. It adheres to a variety of surfaces easily, and has fast-drying properties to speed up repairs.The fan spray nozzle makes application easy, and the primer is compatible with all Halfords lacquers, gloss, and metallic paints. It’s also temperature -resistant up to a huge 110°C once fully hardened.
It can be used on steel, aluminium, fibreglass, body fillers and existing paint and bodywork, as well as on most well-prepared wood, stone, and plastic surfaces (with the use of a plastic adhesion promoting primer first).
Preparing for Primer
Before starting the repair, clean the panel with a lint free cloth and a suitable surface cleaner or degreaser.
Ensure that the bare surface is solid and rust free. Repair any damage by suitable means, and use a suitable abrasive paper, wire wheels etc.
Once the area is fully prepared, clean the panel again with a lint free cloth and a suitable surface cleaner or degreaser. Then take a tack cloth and remove any dust or contaminants on the panel. Use a quality masking tape and masking paper to fully mask off the vehicle, leaving the area to be primed exposed.
Note: This primer is designed to bond to untreated steel. Painting over existing primer or paint may cause adhesion issues and weak welds.
Priming
At this stage, only apply primer to areas that will not be accessible once welded.
Shake the primer for 2 minutes, until you hear the agitator ball inside, then apply a first thin “dust” coat to give best possible adhesion.
Holding the can around 25-30cm from the panel, press the nozzle and move the can in a smooth side-to-side motion.
Don’t over-apply the primer as this can affect the quality of the weld. You should only need 1-2 coats until the area is suitably covered. Allow time in-between coats.
Once fully dry, you can begin welding the panel. Once welding is complete, allow the surface to cool, then clean it again. Apply weld-through primer to all accessible bare metal areas for added corrosion protection.
DIRECTIONS FOR USE:
- Store can at room temperature before use
- The icons on the side of the can give you quick instructions on things like working temperature and drying times
- Ensure you read the complete instructions and familiarise yourself with each step, and make sure you have all consumables you need to hand before you start to paint.
- For detailed instructions see back of can
- Avoid spraying in direct sunshine, cold, damp, humid or windy weather
- Optimum ambient temperature is between +10 - +25
- Once you’re done, spray the can upside down for 5 seconds to clean the nozzle
*The drying time can change depending on the ambient temperature, humidity and the thickness of the coats applied. Ensure the paint is fully dry before moving onto the next stage.
Take care when preparing older paint surfaces (pre-1970) as these may contain harmful lead.
Make sure you have enough ventilation in the area you’re painting in to prevent a harmful build-up of solvent gasses.
DANGER
Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Buildup of explosive mixtures possible without sufficient ventilation. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe spray. If medical advice is needed, have product container or label at hand. Dispose of contents / container in accordance with regional regulations.
